Jiangsu Liside Chemical Plant Co.,Ltd.

Products

	Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether

Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether

Click to enlarge image

Model Number

MP15,MP25,MP35,MP45,MP60

VC-copolymer MP Resin for Industrial Coatings
Nature ◆ copolymers based on vinyl chloride and vinyl isobutyl ether
Range MP15,MP25,MP35,MP45,MP60
Properties copolymers based on vinyl chloride and vinyl isobutyl ether
Physical form fine white powder
Product Specification
Main index sign MP15 MP25 MP35 MP45 MP60
15±5 25±5 35±5 45±5 60±5
44±1 44±1 44±1 44±1 44±1
1 1 1 1 1

Viscosity mpa.s
Chlorine mass fraction ％
volatile ≤％

viscosity of a 20 % solution in toluene at 23 °C (73 °F)(ISO 3219, DIN 53019/53214,shear rate=500s-1)

Application

MP resins are binders resistant to hydrolysis. They can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. They are compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. MP resins offer advantages to both manufacturers and users of coatings:

◆broad choice of solvents, particularly budget-priced blends of aromatic and aliphatic hydrocarbons

◆ good compatibility with other coatings raw materials

◆ good pigment binding capacity even at high solids

◆ unrestricted choice of pigments and extenders

◆ easy application by all common techniques, no cob-webbing even at high solids

◆ thermal stability allows force drying

◆ good adhesion on iron, steel and many unrelated coatings systems, good intercoat adhesion

◆ good resistance of properly formulated coatings to aqueous alkalis and acids, salt solutions, to stress from water, humidity changes, low and cyclic temperatures as well as to chalking and yellowing

◆ long lasting corrosion protection even under extreme outdoor conditions

Packaging and Storage

Safety

Note

◆ 25kgs woven bag with PE liner.MP resins can be stored for 2 years if kept away from heat and moisture.

◆ When handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be observed.

◆ The data contained in this publication are based on our current knowledge and experience. The process and formulation should be adjusted according to the real condition.